in

Top Picks of 2020 EPA Certified Stoves

Heating your home during the cold winter months may sometimes be challenging. Either it’s very expensive, requires a lot of manual labor to have a stealthy wood supply, or it may be negatively impacting the environment. Many different types of stoves including wood burning, pellet, and hydronic heaters, contribute to massive amounts of air pollution each year.

There is a big population of people around the United States that require a residential wood heater in their home, so there’s no getting around using any of these types of stoves as a source of heat. Environmental agencies have to step in to prevent home owners from participating in furthering the pollution of air in the U.S.

In 2015, under the regulations from the Environmental Protection Agency, air pollution regulations were modified for clean air standards by making heaters much cleaner to promote better air quality for residential wood heaters.

Manufacturers of wood stoves must obey the new EPA regulations by undergoing strict certification testing to ensure their products are safe enough for the environment.

Since 2015, wood stove manufacturers have gone through a lot of change in order to meet the EPA’s environmental testing requirements. It’s important to note that the new allotted amount of smoke emissions is now 2.0 grams of smoke per hour, compared to prior years being 4.5 grams per hour. That’s a significant drop.

Due to all the changes that might need to be made when purchasing a new wood burning fireplace, here is a compiled list of EPA certified stoves and wood heaters that meet the revised emission standards.

Top 5 2020 EPA Certified Stoves and Fireplaces Brands

Napoleon S20 Wood Burning Stove
These types of wood stove and fireplaces are a quality product that meets all the requirements for the 2020 standards. With a 1.9 cu. Ft. firebox capacity and an eight hour burn time, this wood burning stove would be the greatest replacement for your old wood burning stove. This stove also emits 2.25 grams of smoke per hour; just as the EPA requires.

Osburn 3300 Freestanding Wood Stove
This stove presents an impressive and environmentally friendly emission rate of 0.95 g/h, so the most eco-friendly buyers should definitely look into this wood stove. With a maximum burn time of 10 hours and a firebox volume of 3.3., this might be a great stove for you.

Vermont Castings Intrepid Flexburn Wood Stove
This wood stove is made in the USA and includes a Flexburn technology. This stove is very efficient as well, coming in at a whopping 0.3 g/h of emissions for catalytic and 0.9 g/h for non-catalytic.

Empire Stove Archway Wood Burning Insert
This is an easy to maintain wood burning insert that meets all of the requirements for emissions limits. With a burn time of 8 hours and a sleek look, this insert is a great choice for your home.

Superior Traditional Wood Burning Fireplace
Now this is a slightly higher emission rate, of 3.7 g/h, but it still meets the EPA phase II requirements, so if you’re not worried about being the most environmentally conscious, then this fireplace is a great choice for you when looking for a more traditional source of wood heat.

If you’re looking for an upgrade to your old wood stove, all of these EPA 2020 certified stoves, wood heaters, and more are available at blazingembers.com. They have a wide selection of EPA certified stoves that will accommodate anyone’s home or cabin.

Take a peek around their website and explore what Embers FIreplaces & Outdoor Living has to offer. If you have any questions regarding a wood burning or gas stove or are curious about the updated EPA standards for your residential wood heater, give them a call at 303-800-5659.

For more information about Built In Bbq Grill and Direct Vent Gas Stove Please visit : EMBERS LIVING.

Report

What do you think?

101 Points
Veteran

Written by Dustin Perasso

Story MakerContent AuthorYears Of Membership

Leave a Reply

GIPHY App Key not set. Please check settings

Snap-in Dentures: 4 Reasons Why You Should Get Them

Wearable App Development and its Challenges