Precaution to Take Before Fitting Car Tyres

Tyres are usually taken for granted until the road puts them to the test. It’s the tyres that stop the car. When it comes to safety, tyres are one of the most important components of your vehicle. The brakes stop the wheels, not your car! It’s actually your tyres that stop it.

The tyres of a car don’t receive the respect that they deserve. Being one the most important and critical parts of a vehicle should count for something right? A tyre is the only part of the car that is in direct contact with the road and a big reason behind the overall performance, stability, and speed of a car.

If you live in or near Birmingham and are looking to buy Toyo tyres then just type, Toyo tyres in Birmingham in a search engine.

When fitting a car tyre, there are certain precautions that you must take. This article will discuss them in-depth.

Changing Tyres near a Busy Road

Sometimes you may get a puncture while driving through a busy road. If that happens then you must ensure that you pull over somewhere safe and flat before attempting to change your tyre. Make sure that you park your vehicle somewhere that will not disrupt other motorists and set up a warning triangle 50 metres behind your vehicle.

When you are safely parked, switch on your hazard warning lights and put your handbrake on. Place your wheel chocks behind your tyres (if available), except for the one you are changing to prevent the car from rolling.

Things to Know When Removing a Tyre

Before removing a tyre, take note of these things:

  • Loosen wheel nuts before lifting a vehicle off the ground.
  • Raise the vehicle only a few centimetres (one inch) from the floor when doing operations on a freewheel or frame-contact lift.
  • Block a vehicle securely on a lift to prevent rolling.
  • Remove or replace the wheel from a squatting position. Minimize back strain by not bending forward.
  • Do not place hands or wrists under the wheel while a vehicle is suspended.
  • Do not service split rim-type tires unless specifically trained in their repair and hazards.

Main Hazards

If you don’t know much about tyre removal, replacement and inflation then don’t tackle them yourself. Let trained professionals handle them. The main hazards which can occur include:

  • Manual handling injuries, which make up for nearly half of all tyre-related incidents reported.
  • Tool-related injuries (which make up a quarter of incidents), especially from tools like tyre levers.
  • Compressed-air accidents. Inflated tyres contain a large amount of stored energy, which varies according to the inflation pressure and the surface area of the tyre. If the tyre fails, an explosive force can be released at an angle of up to 45 degrees from the rupture. This has resulted in numerous fatalities over the years.


These are some of the things that you need to keep in mind before or during a tyre fitting. If you have experience and want to save money then you can do it on your own. If not then let a professional handle the job for your safety.


What do you think?

101 Points

Written by Phoebe Lambert

Story MakerYears Of MembershipContent Author

Leave a Reply

GIPHY App Key not set. Please check settings

Nedo Measuring Tools for Surveyors and Construction Professionals

How Do You Benefit With Electronic Checks As A Receiver & A Sender